Canon A70 - Manual (Page 207)

202
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Completely remove all dust and dirt from conversion
lenses with a lens blower brush before use. The camera
may focus on any dirt that remains.
• Exercise due caution when handling the lenses since it
is easy to dirty them with finger prints.
• Be careful not to drop the camera or adapter when
removing the ring.
• When shooting with these attachments, please use the
LCD monitor to compose your shots. The attachments
block part of the view through the viewfinder, and the
area shown in the viewfinder does not match the area of
the shot that is actually recorded.
• You should not shoot images in mode when using
these attachments. Although it is possible to select this
mode at the camera, the PhotoStitch software will not
be able to stitch the images together at the computer.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○