Canon A70 - Manual (Page 169)

164
3
Select images for transferring.
Single Images
• Select an image using the left or
right button and mark or remove
marks from images using the up
or down button.
• You can use the same
procedures to select images in
index replay (3 images).
All the Images on a CF Card
• Switch to index replay (three
images).
• Press the button, select
[Mark All] using the up or down
button and press the
button
again. (If you select [Clear All]
instead of [Mark All], you can
remove marks from all the
images.)
• You can mark or remove a mark from each image after
marking or removing marks from all the images.
4
Press the button.
The selection mode will turn off and the Transfer Order
menu will reappear.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Images are transferred in order from oldest to newest by
the shooting date.
• A maximum of 998 images can be marked per CF card.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○