Changing shooting functions, Af assist beam (p. 150) / red-eye, Turning off the af assist beam (p. 150) – Canon Battery Charger CB-2LY CDI-E409-020 User Manual

Page 150: Co py

150

If you set the mode dial to

G, you can change the settings in the 4 tab

Turning off the AF Assist Beam

The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.

●

Choose [AF-assist Beam], then press the

buttons to choose [Off].

Changing the Flash Timing

You can change the timing for the flash and shutter.

●

Choose [Flash Settings] and press the

button.

●

Press the

op buttons or turn the Ê dial to

choose [Shutter Sync.] and press the

buttons to choose a setting.

Before attempting to shoot using a function explained in this chapter in
modes other than

G mode, check if the function is available in those

Changing Shooting Functions

1st-curtain

The flash fires right after the shutter
opens.

2nd-curtain

The flash fires right before the shutter
closes.

EC272_CUG-E_CDI-E409.book Page 150 Thursday, August 27, 2009 3:06 PM