Chrysler 2007 Sebring Sedan - Manual (Page 322)

BULB REPLACEMENT
Head Lamp Bulb Replacement
1. Open the hood and remove the two head lamp mount-
ing screws.
2. Remove the push-in fasteners by prying under the
head of the fasteners with a flat bladed tool.
3. Gently pry the head lamp assembly away from the
fender as shown in the picture. This will free the ball stud
from its retainer in the fender. Pull the head lamp
assembly away from the vehicle.
4. Rotate bulb and connector 1 ⁄
4
turn counterclockwise.
5. Pull the bulb out of the socket and replace the bulb.
Removing Head Lamp For Bulb Replacement
Gently Pry Out Head Lamp
322 MAINTAINING YOUR VEHICLE