Concord Camera Concord Eye-Q 4363z - Manual (Page 14)

12
En
SETTING THE FLASH
How to set the flash:
Press / repeatedly until the desired indicator appears on the LCD.
Flash Mode Description
Auto Flash (Default) The camera judges if a flash is required. If the environment is too dark,
the flash will fire.
Auto + Red-Eye Use this mode to significantly reduce the occurrence of “red-eye” in flash
photography. The camera will automatically detect when the flash is needed
and the flash will fire after a short delay.
Flash ON Flash will fire in any lighting condition. The “red-eye” reduction function is
included also.
Flash off The flash will not fire in this mode. Please use this mode if you want to
capture the mood of the ambient lighting or to use the available light in
places where flash photography is prohibited, such as museums.
• To prevent blurry pictures in low light situations, hold the camera steady
when pressing the Shutter button or mount the camera on a tripod.
Note:
• The flash needs to recharge after it is fired. If the Shutter button is pressed while the flash is
charging, the Flash Ready LED will blink. Please wait a few moments and press the Shutter button
again to take a picture.
• Some of the Scene Selection Modes will deactivate the flash setting. Please refer to p.20 for more
information.
A
TAKING A PICTURE
A
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
3 M 28/45 A
AWB
A
AWB
A
AWB
AWB
5
10
30
2
fig. 1.1 fig. 1.2 fig. 1.3
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
AWB
3 M 28/45
5
10
30
2
DZ4363 UG(514338-02)-E 12 6/15/04, 5:35:42 PM