Concord Camera Concord Eye-Q 4363z - Manual (Page 12)

10
En
About Flash Ready LED
Note: Do not power the camera off or change camera mode while the camera is capturing or storing a picture
or video clip. Otherwise, the picture or video clip may be corrupted.
TAKING PICTURES WITH THE LCD
1. Set the camera to ( ) camera mode.
2. Frame the subject in the LCD. (fig.1.1)
3. Press the shutter button half-way to activate the auto-focus lock until the green AF LED stops blinking and
the AF frame turns green. (fig.1.2)
• The camera will automatically determine the best focus, and a rapid click sound can be heard.
Note: For more information on Focus Lock, please go to p. 11. To change AF mode, please refer to p. 24.
4. Press the shutter button fully to capture the image. (fig.1.3)
• The camera will make a click sound.
• The camera will beep when the image is captured.
• When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that
the image is being stored.
• A preview of the image will be displayed on the LCD for a second. To change the preview interval, please
refer to p.42.
• The picture counter number displayed in the LCD will be updated.
5. If you are not satisfied with the image, you may simply press ( ) button to delete the image before it is
saved. For details, please refer to p.30.
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
Steady
The camera is
capturing a video clip. Blinking
The flash is recharging, or
LCD is auto powered off.
TAKING A PICTURE
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
3 M 28/45 A
AWB
A
AWB
A
AWB
AWB
5
10
30
2
fig. 1.1 fig. 1.2 fig. 1.3
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
4 M 28/45
A
AWB
A
AWB
4 M 28/45
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
DZ4363 UG(514338-02)-E 10 6/15/04, 5:33:42 PM