Char-Broil 463230511 - Manual (Page 17)

1/4 -20x2-3/8"
Machine Screw
"
Qty. 6
ASSEMBLY
1
• Place bottom shelf between side panels . Attach to left and right side panels with (4)
1/4”-20x2-3/8” machine screws and 1/4”-20 flange nuts at front, and (2) 1/4”-20x2-3/8” machine screws and 1/4”-20
flange nuts at rear.
with cut out hole for LP cylinder on left
1
2
1/4 -20
Flange Nut
"
Qty. 6
• Place lower back panel between side panels as shown. Attach to left and right side panels with (4) #8-32x3/8” sheet metal
screws. Then attach to bottom shelf with (2) #8-32x3/8” sheet metal screws.
Sheet Metal Screws
Qty. 6
#8-32x3/8"
Left Side Panel
Right Side Panel
Right Side Panel
Left Side Panel
Magnet Assembly
Lower Back Panel
For Front Door
Brace Assembly
Bottom Shelf
Rear
Front
Bottom Shelf
17