Jaypro Sports FBGP-620 - Manual (Page 10)

976 Hartford Turnpike
Waterford, CT 06385 USA
(800)243−0533 Fax: (800)988−3363
www.jaypro.com
DATE: DRAWN BY:
5/3/2010
MODEL NUMBER: CHECKED BY:
PRODUCT NAME:
DONL
FBSLV5 INSTRUCTIONS
GROUND SLEEVE INSTRUCTIONS
WVB
REV:
B
GROUND SURFACE
GOOSENECK
NOTE: ASSEMBLE THE THREADED RODS AT THE BASE OF THE GOOSENECK AS SHOWN,
PLUMB THE GOOSENECK WITH THE THREE JACKING SCREWS AT THE TOP OF THE
SLEEVE BEFORE CROSS DRILLING THROUGH THE SLEEVE AND MAST AND ASSEMBLING
THE 8 in THREADED ROD AND NUTS AS SHOWN
FIGURE 4
T:\Aftermarket\Football\FOOTBALL SLEEVES\PRODUCTION\FBSLV5 INSTRUCTIONS.idw
ANTI-ROTATIONAL ROD
1/2-13 x 8 in
JACKING SCREW
1/2-13 x 2 in HEX BOLT
WITH JAM NUT TYPICAL
3 PLACES
1/2-13 FLANGE NUTS
CENTERING RODS
1/2-13 x 6''
1/2'' -3/4'' REBAR
6 PIECES RECOMMENDED
(NOT INCLUDED)
48 in
54 in
6 in MIN
36 in
4 in
2 in
62 1/4 in
TO INSIDE EDGE
ENDZONE END LINE FIELD SIDE
1/2-13 FLANGE NUTS
REV DESCRIPTION DATE BY
B FOOTING DEPTH WAS 66 in 2/9/2012 DRL