Jaypro Sports FBGP-720 - Manual (Page 10)

SIZE: SCALE: REV.: DRAWING NAME: PART NUMBER: SHEET:
A N/A B GROUND SLEEVE INSTALLATION FBSLV6 INSTRUCTIONS 1 2 OF
TITLE: INITIALS: DATE:
DESIGNER:
CHECKER:
DONL
WVB
4/7/2010
THIS DRAWING IS THE SOLE PROPERTY OF JAYPRO SPORTS INC. AND MAY NOT BE REPRODUCED
WITHOUT WRITTEN PERMISSION OR CONSENT
PROJECTION METHOD:
UNLESS OTHERWISE SPECIFIED
TOLERANCES:
X X = + 1/16"
X = + 1/16"
PHONE:
800.243.0533 (TOLL FREE)
860.447.3001 (LOCAL) FAX:
860.444.1779 (SALES)
860.440.0628 (ENG.)
JAYPRO SPORTS, LLC, 976 HARTFORD TURNPIKE, WATERFORD, CT 06385 USA
x.x = + 0.1
x.xx = + 0.01
x.xxx = + 0.005
FIGURE 4
T:\Aftermarket\Football\FOOTBALL SLEEVES\PRODUCTION\FBSLV6 INSTRUCTIONS.idw
NOTE: ASSEMBLE THE THREADED
RODS AT THE BASE OF THE
GOOSENECK AS SHOWN, PLUMB THE
GOOSENECK WITH THE THREE BOLTS
AT THE TOP OF THE SLEEVE BEFORE
CROSS DRILLING THROUGH THE
SLEEVE AND MAST AND ASSEMBLING
THE 8 in THREADED ROD AND NUTS AS
SHOWN.
1/2-13 FLANGE NUTS
ANTI-ROTATION ROD
1/2-13 x 8 in
JACKING SCREW
1/2-13 x 2 in HEX BOLT
WITH JAM NUT TYPICAL
3 PLACES
GOOSENECK
78 in
TO INSIDE EDGE
OF ENDZONE END LINE FIELD SIDE
SECTION A-A
36 in
6 in
54 in
6 in
GROUND SURFACE
2 in
48 in
REV DESCRIPTION DATE BY
B REVISED SLEEVE DEPTHS 7/15/2010 DRL