ClearSounds SW200 - Manual (Page 9)

9 – ENGLISH
█
LCD CONTRAST SETTING
To adjust the brightness of the display, simply move the
Dimmer Control located on the back of your clock to HI or LO.
█
CONNECTING A LAMP
You are able to connect a lamp to the clock and use the lamp
for room lighting and/or alarm clock notification.
1. Connect the lamp to the lamp outlet on the back
of the clock.
2. Make sure the lamp is turned to the ON position.
3. Press to turn the lamp On/Off.
Note : You will only use to turn the lamp On/Off. Do
not turn the lamp to the OFF position.
█
ALARM NOTIFICATION MODES AND ACTIVATION
You can adjust the type of notification that is desired. The
available notifications for each alarm include: LED/optional
Lamp Flashing, Sound (with 3 pattern options), and Vibrating
Shaker (1 vibrating pad is included with the SW200). For each
alarm, you can select a combination of the 3 notifications.
To activate each of the alarm functions and have them in
“ready mode”, simply press and hold the desired notification
key until the blue backlight appears. To deactivate, press and
hold until the blue backlight disappears. After having each
function in “ready mode”, you will be able to select the specific
notification you desire for each alarm (see Set the Alarm and
Audible, Visual & Shaker Notification on page 13-14 ).
SETTINGS