ClearSounds SW200 - Manual (Page 14)

14 – ENGLISH
6. The current On/Off selection for the Sound Alarm
(r1=On/Off) will blink. Press Up or Down to
select On or Off and then Press Set Alarm .
7. If you select On, the current pattern for the sound alarm
(P1-P3) will blink (if selecting Off, skip to step 8).
Press Up or Down to select the desired sound
pattern and then Press Set Alarm .
8. The current On/Off selection for the LED/Lamp Flashing
(F1=On/Off) will blink. Press Up or Down to
select On or Off and then Press Set Alarm .
The alarm setting is now complete and will show the
current time.
Please Note : At any point, you can press Return to
save and exit.
█
SNOOZE KEY
When your clock alarm activates, you can temporarily turn it
off using the Snooze key. The Snooze key will stop the alarm
for 5 minutes. After 5 minutes, the alarm will activate again.
You can continue to press the Snooze key for a total of 1 hour
after which the alarm mode will be automatically switched off.
The Snooze key is located on the top of the clock.
█
ALARM OFF KEY
When your clock alarm activates, it will continue for 5
minutes if no key is pressed. If you press Set Alarm ,
the alarm will turn off and it will reset to activate at the
same time the next day.