ClearSounds SW200 - Manual (Page 12)

12 – ENGLISH
█
SET THE TIME
If your clock is connected to the phone line and you subscribe
to Caller ID service, the time will be automatically set when
you receive a call.
You can also select a 12 or 24 hour mode. Please make sure
to set the correct AM/PM time. A round light in the upper right
of the clock display will appear for PM time. For AM time, the
light does not appear.
To select 12 or 24 hour time
1. Press Set Time and the display will show the
current time mode (12 or 24).
2. Press Up or Down to change the mode.
3. Press Return to save and exit.
To set the time
1. Press Set Time twice and the current hour
setting will blink.
2. Press Up or Down to change the hour.
Keep pressing the key until you reach the desired hour.
3. Press Set Time and the current minute setting
will blink.
4. Press Up or Down to change the minute.
Keep pressing the key until you reach the desired minute.
5. Press Return to save and exit.
OPERATION