ClearSounds A300 - Manual (Page 55)

55 – ENGLISH
█ Paging
You can page the handset from the base unit to help locate the
handset. Press
on the base (hold for less than 5 seconds) and all of the
handsets registered to the base will ring for about 1 minute.
To stop paging, press
on the base again or press any key
on the handset.
NOTE:
If you hold for more than 5 seconds, the base
will enter registration mode.
█ Key Lock
You can lock all keys on the keypad except for the M1 – M4
memory dial keys. While in locked mode, the handset still can
be answered by pressing
. When you hang up, the handset
will return to the locked mode.
To lock the keypad, in standby mode, press and hold until
the display shows “HS Locked” and the icon appears.
To unlock the keypad, press and hold until the icon
disappears.
While in locked mode, if you press any key, the phone will
generate a warning tone and “HS Locked” will be displayed.
█ Alarm
You can set an alarm on the handset (the alarm also supports
the snooze function). To set the alarm:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press the Select soft key to select Alarm and the display
will show the current set-up.