ClearSounds A300 - Manual (Page 18)

18 – ENGLISH
the Registration tone will sound and the base assigns a
number to the handset. If the PIN entered is invalid, a
warning tone will sound and the handset will return to
the previous registration state.
6. If the base is not found, the handset will behave
according to the Out of Range description found on
page 28.
█ Using the Handset Amplification Function
Your ClearSounds ®
A300
is equipped with a specialized
amplification function designed to adjust to your needs.
Flexibility in the management of amplification is important
when trying to achieve listening clarity. Be sure to try all levels
of amplification to find the best level for your hearing needs.
During a call, adjust the volume to fit your hearing
requirements by pressing up
or down on the navigation
key. The handset volume can also be pre-selected by following
the instructions in Audio Setup, found on page 29.
█ Using your Handset Speakerphone
The handset has a built-in speakerphone. When using the
speakerphone, you can enjoy the convenience of hands-free
conversation. To activate the speakerphone:
In standby mode:
1. Press twice to turn the speakerphone on. The
icon will appear on the LCD.
2. Press to turn the speakerphone off and switch to
handset mode. The icon will disappear from the
LCD.
During a call:
1. Press to turn the speakerphone on. The icon
will appear on the LCD.
2. Press to turn the speakerphone off and return to
handset mode. The icon will disappear from the
LCD.