ClearSounds A300 - Manual (Page 30)

30 – ENGLISH
█ Menu Keys Tone Setting
Your ClearSounds ® A300 comes from the factory preset for
menu Keypad Tones ON. This refers to having an audible
tone when navigating the menu to verify a selection. To
change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press up or down to select Tone Setup and then
press the Select soft key.
4. Press the Select soft key again to select Key Tone.
5. Press up
or down to select On or Off to activate/
deactivate the audible tone function and then press the
Save
soft key.
NOTE:
In certain error conditions, a warning tone will sound
when an incorrect key is pressed.
█ One-Touch Memory Setting & Dialing
Your phone allows you to program 5 frequently dialed numbers
(M1 to M4 and the SOS key). Each memory key can store up
to 20 digits. You can insert one 3 second pause into dialing
or memory storage in order to access custom and telebanking
services, long distance, calling cards, etc. Press the right
button at the desired point in the number to insert the pause
and the letter P will appear.
Storing M1-M4 and SOS Key Memory Numbers
1. Press the memory key (M1-M4 or SOS) in standby
mode.
2. The display shows “Number ?” Enter the desired number
(up to 20 digits) and you can use the Erase soft key to
erase digit(s). Then press the Next soft key.
3. Press up or down to select from Melody 1 –
Melody 10
and then press the Save soft key.
NOTE:
These will appear as the first five entries in your
phonebook.