Playing a cd, Cd player – Philips AZ 1402 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD PLAYER
Playing a CD
1
Select the CD player by pressing the CDTAPE-TUNER button
several times until appears on the display.
2 Open the tray by pressing the OPEN-CLOSE A button.
3 Insert an audio CD (printed side up) and close the tray by
pushing it gently or pressing the OPEN-CLOSE
A
button again.
-► The CD player starts and scans the contents list of the CD.
Display indication: the total number of tracks and the total
playing time. After that the CD player stops.
4 Press the PLAY-PAUSE ►II button to start CD play.
->- Display indication: the current track number and the
elapsed time of the current track.
5 Press the STOP ■ button to stop CD play.
-► Display indication: the total number of tracks and the total
playing time.
You can interrupt CD play by pressing PLAY-PAUSE ►!!.
Continue CD play by pressing the button again.
-► Display indication: the time where playback was stopped
flashes.
Notes: CD play will also stop if:
- you open the tray;
- you push the POWER button or
-
the end of the CD is reached.
If you make a mistake operating the CD player, or the CD
player cannot read the CD, the display indicates £<-
>-or
(see
TROUBLESHOOTING).