Tuner, Tuning to radio stations, Improving radio reception – Philips AZ 1402 User Manual
Page 7: Tuner -8, 5 r c h
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNER
Tuning to radio stations
1
Select the tuner by pressing the CD-TAPE-TUNER button
several times until Emma appears on the display.
2 Select the wave band by using the BAND selector.
-► Display indication: the selected waveband.
3 Press TUNING or for approx, one second and then release
the button.
-► The radio automatically tunes to a station with sufficient
strength. Display indication during automatic tuning:
5 r c h
4 Repeat this procedure until you find a station you desire.
To tune to a weak transmitter briefly press TUNING or as
often as necessary for optimum reception, or until the correct
frequency is indicated in the display.
Improving RADIO reception
For
FM
pull out the telescopic antenna. To improve the signal,
incline and turn the antenna. Reduce its length if the signal is too
strong (very close to a transmitter).
For
MW
and
LW,
direct the built-in antenna by turning the whole
set. The telescopic antenna is not needed.
m
5r ch
o>
s
lU