Philips AZ 1402 - Manual (Page 13)

CASSEHE RECORDER
Recording from the CD player - CD synchro start
1 Select the CD by pressing the CD-TAPE-TUNER button
several times until E0 appears on the display.
2 Insert a CD and, if desired, program track numbers.
3 Press STOP-OPEN ■ A to open the cassette compartment.
4 Insert a blank cassette with the open side facing the front.
5 Close the cassette compartment by pushing it down.
6 Press RECORD • to start recording.
-► Playing of the CD or program starts automatically. It is not
necessary to start the CD player separately.
7 For brief interruptions, press PAUSE II. To resume recording,
press the PAUSE II key again.
8 To stop recording, press STOP-OPEN ■ A.
Notes: the recording can be started from different positions:
- if the CD piayer is in the pause mode, recording will start
from this very Position [use SEARCH t« or»\l;
- if the CD player is in the Stop mode, recording will start
from the beginning of the CD or program.
8)
S
lU
Recording from the radio or with the microphone
1 (Selecting and preparing the source)
RADIO: Select the radio by pressing the CD-TAPE-TUNER button
several times until niBBa appears on the display.
MICROPHONE: Select the tape by pressing the
CD-TAPE-TUNER button several times until BBS appears on the
display. Connect a microphone with a 3.5 mm plug to the MIC
socket and set the VOLUME control to zero (monitoring during
microphone recording is not possible).
2 Press STOP-OPEN ■ Ato open the cassette compartment.
3 Insert an unprotected blank cassette with the open side facing
the front.
4 Press RECORD • to start recording.
5 For brief interruptions press PAUSE II. To resume recording press
the PAUSE II key again.
6 To stop recording, press STOP-OPEN ■ A.
Note: When recording from the radio ora CD, you can connect a
microphone and mix the sounds. Otherwise, be sure there is no
microphone connected that could disturb your recording.
13