Cabletron Systems 6A000 - Manual (Page 30)

2-12 SmartCell 6A000 User Guide
SmartSwitch ATM Administrator Switch Installation and Setup
To obtain an explanation of a command and its parameters, enter the word help (or ?) before the command.
SmartCell ZX # ? add laneclient
Create LANE Client
============================================================================
ClientNumber Local Client Number (0-127)
LanName Name of the ELAN to join
ServerType Type of LANE Server [LECS, LES]
ServerAddress ATM Address of the LANE Server
IPAddress IP Address of the Client
NetMask IP Netmask of the Client
MTU MTU for the Client [1516, 9234, NONE]
SmartCell ZX #
While entering a command, you can obtain help about the current parameter by entering a question mark (?) at the
prompt. For example:
SmartCell ZX # add atmroute
PortNumber(A1) : a3
AtmAddress() : 39:00:00:00:00:00:00:00:00:00:14:72:80
PrefixLength(104) :
Index(0) :
Type(Internal) : ?
The type of reachability. Use Internal, Exterior, or Reject.
Type(Internal) :exterior
Scope(0) :
MetricsTag(0) :
SmartCell ZX #
2p›F Press the Esc key to back out of any command before you enter the last value.
2.6 SMARTSWITCH ATM ADMINISTRATOR
SmartSwitch ATM Administrator is a Windows application that manages SmartCell ATM switches. It supports the
following operations:
U
Switch management
U
Emulated Local Area Network (ELAN) management
U
Connection management
U
Alarm management
U
Switch discovery
Additionally, the SmartSwitch ATM Administrator provides the following capabilities that are not available from the
console interface:
U
Use a graphical user interface
U
Perform drag and drop operations
U
Manage all switches from one console
U
Perform transactions across multiple switches (for example, create an ELAN when the servers are
not co-located