Erasing a programme, Erasing a track from a programme, Programming – Philips CD 608 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PROGRAMMING
You can store 20 tracks from each CD in any re
quired sequence in a programme. If you exceed
the maximum of 20 tracks, ERR(or) lights up.
ERASING A PROGRAMME
(STOP/CM or OPEN/CLOSE)
STORING A PROGRAMME
(1-0 or NEXT and PREVIOUS and STORE)________
• Close the CD compartment by hand or by
pressing OPEN/CLOSE.
- The display shows the number of tracks and
the playing time of the CD.
• Key in the first track number you wish to store
or press NEXT or PREVIOUS until the number
appears under TRACK.
• Now press S(tore) within 8 seconds.
-
The playing time of the programme will be
shown under TOTAL TIME (for 2 seconds).
- After the number a P(for Programme) will ap
pear; the number has now been stored in the
player's memory.
• Select the other track numbers required and
store each track by pressing S(tore).
- The number indicator always shows which
numbers have been stored.
STORING A PROGRAMME USING SCAN
• Press SCAN before or during play.
- If the CD compartment was open, it will now
close.
-------- lights up and the first 10 seconds of each
track are played in turn.
• Press S(tore) at each track you wish to include
in the programme.
- The player immediately starts to play the first
10 seconds of the next track.
• Press PLAY/REPLAY to play the programme.
CHECKING THE PROGRAMME (REVIEW)
• Press REVIEW before, during or after program
med play.
- REVIEW lights up and all the track numbers ap
pear in the programmed sequence under
TRACK.
PLAYING THE PROGRAMME (PLAY/REPLAY)
• Press PLAY/REPLAY.
- Play begins with the first number of the pro
gramme.
All keys can be used during programmed play (ex
cept EDIT and CANCEL).
Searching for a passage is limited to within the
track being played.
• Press STOP/CM twice, or, if the CD has already
stopped, just once; you can also press
OPEN/CLOSE straight away.
- The programme has now been erased.
ERASING A TRACK FROM A PROGRAMME
(REVIEW and CANCEL)_______________________
• Press REVIEW, before or after programmed
play (STOP mode).
- REVIEW lights up and all the track numbers ap
pear in the programmed sequence under
TRACK.
• Press C(ancel) within 2 seconds as soon as
the number you wish to erase, appears.
- The number disappears from the number indi
cator; it has now been erased.
O)
c
u