Tape, 3 press play ► on tape deck 2, 4 press pause on tape deck 1 – Philips FW45C User Manual
Page 21: 5 press play ► on tape deck 1, Selecting external equipment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE
Continuous Playback From Tape Deck 2
to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY ► on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY ► on tape deck 1.
-* Playback will begin with tape deck 2 and will
continue with tape deck 1 when playback on tape
deck 2 ends.
6 Press STOP»OPEN if you want to stop playback before
the end of the tape in tape deck 1 or tape deck 2.
Notes:
- During rewinding or fast forwarding of a tape, it is also
possible to select another source mode (e.g. CD, TUNER
or AUX model
- Check and tighten slack tape before use with a pencil.
Slack tape may get jammed or may burst in the
mechanism.
- C-120 tape is extremely thin and is easily deformed or
damaged. It is not recommended for use in this system.
- Store the tapes at room temperature and do not put
them too close to a magnetic field (for example, a
transformer, TV or loudspeaker boxesj
AUX
Selecting External Equipment
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the enhanced sound
from the system.
• Press AUX to select the external mode.
-► "Ru"" will be displayed.
Note:
All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.
21