Philips FW45C - Manual (Page 16)

CD
Warning!
1) This system is designed for conventional CDs. Do not use any accessories like disc stabilizer rings or CD
treatment sheets, etc., which may damage the CD mechanism.
2} Do not load more than one disc into each tray.
3) When the CD changer is loaded with CD(s), do not turn over or shake the system. This may jam the changer.
You can load up to three discs in the CD changer for continuous playback without interruption.
Loading the CD Changer
I Press CD to select CD mode.
! Press 0PEN*CL0SE
^ The CD compartment slides out.
I Load a CD with the printed side up in the right tray.
* You can load another disc in the left tray.
► To load the third disc, press the DISC CHANGE button.
— The CD changer carousel will rotate until the empty
tray is at the right hand side and is ready for loading.
Playback will always start with the disc in the outer
right disc tray.
I Press 0PEN»CL0SE to close the CD compartment.
-*■ The total number of tracks and playing time of the
last selected disc appear on the display.
CD Direct Play
You can play a CD directly by pressing the DISC 1, DISC 2
or DISC 3 button. The CD player will stop at the end of
playback of the selected disc.
- When the button is lighted, it indicates that there is a
disc loaded in the disc tray.
Playing a CD
1 Press PLAY ► to start playback.
The disc tray, track number and elapsed playing time
of the current track appear on the display.
• To interrupt playback, press PAUSE II.
-* The playing time flashes.
• To resume playback, press PLAY ► again.
2 To stop playback, press STDP»CLEAR ■ .
16