Philips STU130A - Manual (Page 13)

JC
ф
»
с
ш
— H o w to modify the initial programma­
tion of your receiver
How to modify the parameters of a programme
Video frequencies
Use one of the keys of the remote control «VIDEO» Д о г V • The selection of the frequency -from 920 to
2.050 MHz- is made by steps of 250 kHz. If the VIDEO FREQUENCY MODE is activated, the frequency
may be entered by the numerical block from 0 to 9.
Note: By direct entry through the numerical keys, for frequency inferior to 1000 MHz, it is necessary to
enter 0 first.
For example:
Enter Display Frequencv Frequency band in
input (MHz) (MHz)
о 0950 ^950 950 920 to 999
о 1950 Ï-9.50 1950 1000 to 1999
о 2050 >-0.50 2050 2000 to 2050
Picture contrast -DEV-
o
Press the DEV key to adjust the picture contrast.
Ï- 2 positions «LO» video deviation of 16 MHz
«HI» video deviation of 25 MHz
Polarization
The H/V key allows the choice of the LNC supply
Disolav LNB voltaoe Polarization
о Press H/V »(-H-) 18 V Horizontal
о Press H/V 14V Vertical
To chose the tone control -22 kHz-
o Press H/V
o Then on «0» key on the numerical block.
s- Display ON or OFF -Meaning 22 kHz «ON» or «OFF»