Locking/unlocking a programme, How to mute the sound, How to switch your receiver to stand-by mode (i) – Philips STU130A User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o
If you have connected your equipment using an euroconnector cable, select the external mode -EXT- on
your video-recorder.
s- You may now proceed with the usuai recording procedure. If you wish you may watch another TV program
- Terrestriai transmission - or switch off your TV-set.
Locking/Unlocking a programme
Locking
o
Seiect the channel that will be unaccessible -ie: 10-
s- 010 is displayed
o
Press the ERASE key of the remote control.
>- E - - i s displayed
o
Press twice on the «0» key of the remote control,
s- E is displayed then 010 blinks twice.
5- 010 is dispiayed
Note: Channei 010 is unacessible at this time by using the CH ^ V keys. The search can only be made
by using the numericai biock by keyboarding its number.
o
Press 0-1-0
s- DispiayOlO
Unlocking
o
Enter the programme number on the numerical block -eg: Programme 10-.
5- 010 is displayed
o
Press «STORE».
> 0 1 0 blinks twice. The programme is now accessible again with the CH ^ V keys.
How to mute the sound
o
Press on the key of the remote controi.
> A green dot biinks on the right of the display and the sound is muted,
o
Press again on the key to reactivate the sound.
How to switch your receiver to stand-by mode (i)
o
Press the ([) key on the remote control or on the receiver.
> A green light turns on and the receiver switches to stand-by.