beautypg.com

Slumber – Philips AJ3802/05 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

SLUMBER

slumber time

The clock radio has a built-in slumber function. This function enabies you to listen

to the radio or a cassette or to continue recording before you fail asleep. You will

not have to switch off the set yourself. This will take place automatically.

The time you listen to the radio before you fall asleep is called slumber time. The

normal slumber time is 59 minutes.

59 minutes If you wish to slumber for 59 minutes, proceed as follows:

• Set the mode selector © to either RADIO (for radio reception or recording)

or TAPE (for cassette playback).

• Press the SLUMBER button © only. The display will show that you have a

slumber time of 59 minutes.

shorter If you wish to slumber for less than 59 minutes, proceed as follows;

• Set the mode selector ©to either RADIO (for radio reception or recording)

or TAPE (for cassette playback).

• Hold down the SLUMBER button © and the MINUTE button ©. The display

now starts to count down from 59 to 00 minutes. As soon as the required
slumber time is reached, release both buttons.

• Should you accidentally press HOUR © instead of MINUTE ©, the display will

indicate 1.59 hours. Press the SLUMBER button © again to return to 59
minutes.

longer If you wish to slumber for more than 59 minutes (the maximum is 1 hour and 59

minutes), proceed as follows:

• Set the mode selector © to either RADIO (for radio reception or recording)

or TAPE (for cassette playback).

• Hold down the SLUMBER button © and press the HOUR button @. The

display now indicates 1.59 hours.

slumber off You can switch off the set before the slumber time has elapsed:

• Press the SLUMBER OFF button © and the set is switched off.

— If the mode selector © is set to RADIO or TAPE and the alarm is not switched

on, the siumber function will not work, because the set simply remains

switched on.

— The slumber function does not affect the alarm.