Philips AJ3802/05 - Manual (Page 7)

CASSETTE
RECORDING
radio
PLAYBACK The set can be used as a cassette player.
• Make sure the alarm is off (OFF= . m .).
• Set the mode selector Q to TAPE.
• Press ■ STOP.EJECT to open the cassette holder and insert a prerecorded
cassette.
• Press ► PLAY to start playback.
• Adjust the volume with the VOLUME control @i
• Press ^ F.FWD for fast forward winding and REWIND for fast rewinding.
To stop fast winding, press ■ STOP.EJECT.
• You can interrupt playback temporarily by pressing II PAUSE. In order to
continue playback, press II PAUSE again.
• Press ■ STOP.EJECT to stop playback.
At the end of the cassette the player will automatically stop.
You can use the set to record from the radio or from the built-in microphone (e.g.
a message). Using the alarm you can also make a unattended recording.
If you wish to record from the radio:
• Setthe mode selector©to RADIO and make sure the alarm is off (OFF = m .).
• Tune to the desired radio station and adjust the volume.
• Open the cassette holder and insert a blank cassette.
'
• Press • RECORD to start recording.
• You can interrupt the recording by pressing the II PAUSE button. Press again
to continue recording.
• Press ■ STOP.EJECT to stop recording.
microphone You can leave a message on the cassette using the built-in microphone:
• Setthe mode selector©to TAPE and make sure the alarm is off (OFF= jt).
• Open the cassette holder and insert a blank cassette.
• Press • RECORD to start recording. You can now leave a message. The
MESSAGE indicator (g) comes on.
• You can interruptthe recording by pressing the II PAUSE button. Press again
to continue recording.
• Press ■ STOP.EJECT to stop recording.
• The MESSAGE indicator ® remains lit to indicate that there is a message
waiting. If there is no need for the indicator to remain iit, or if the message has
been played, you can switch off the MESSAGE indicator by pressing the
RESET button ®.
with timer You can make an unattended recording by using the alarm as a timer:
• Set the mode selector © to RADIO if you want to record from the radio or
to TAPE if you want to record through the microphone.
• Set the alarm to the hour you want to start recording by using the time set
buttons @.
• Open the cassette holder and insert a blank cassette.
• Press the ALARM ON/OFF button © (ON = T h e alarm indicator on the
display @ comes on.
• Press • RECORD. The set will now start recording at the set alarm time. Do
not forget that the recording cannot be longer than the time available on the
cassette.