And last but not least – Philips AJ3802/05 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AND LAST BUT NOT LEAST...

Important note for

users in the U.K.

When fitting a mains piug to the mains lead proceed as follows:

The wires in the mains iead are coloured In accordance with the following code:

BLUE = NEUTRAL. BROWN = LIVE.

These colours may not correspond with the coiour markings identifying the
terminals in your plug, so proceed as follows:

Connect the Brown wire to the terminal marked L or coloured Red.
Connect the Blue wire to the terminal marked N or coloured Black.

Do not connect either wire to the earth terminai in the piug which is marked by the

letter E or by the safety earth symbol or which is coloured green or green and

yellow. No connection is necessary to the earth terminal.

Note:

This apparatus must be protected by a 3 amp fuse if a 13 amp plug is used

or, if any other type of plug is used, by a 5 amp fuse either in the plug or adapter
or at the distribution board. If in doubt consuit a qualified electrician.

Warning:

When this unit is not in use and aiso before attempting internal

examination, remove the mains plug from the wall socket.

(SI — For recording, use only NCRMAL cassettes (lEC I). For playback, any cassette

type can be inserted.

— Keep the cassette side to be safeguarded in front of you (fig.2) and break out

the left tab. Recording on this side is now no ionger possible. You can render
this safeguard ineffective by covering the aperture with a piece of adhesive
tape.

not infringed.

For U.K. only:

Recording and Playback of material may require consent. See

EC regulations This clock radio conforms to the radio interference requirements of the European

Community.

type plate The type plate is located on the underside of the set.