beautypg.com

Alarm – Philips AJ3802/05 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

ALARM

ALARM TIME

ALARM ON

J3

The alarm time is the time at which you wish to be woken.

• Keep the ALARM SET button @ pressed. The display now shows the alarm

time.

• Set the required alarm time using the HOUR and MINUTE buttons ©.
• Release the ALARM SET button. The display again shows the correct time.

You can check the alarm time by pressing the ALARM SET button ©.

The clock radio can wake you in 3 ways:

1. By radio

• Make sure the volume of the radio is loud enough to wake you.

• Set the mode selector © to RADIO.
• Press the ALARM ON/OFF button © (ON = -.). The alarm indicator on the

display © comes on.

• At the set alarm time you will be woken by the radio.

£].

2. By buzzer

• Set the mode selector © to BUZZER.
• Press the ALARM ON/OFF button ® (ON= -.). The alarm indicator on the

display © comes on.

• At the set alarm time you will be woken by the buzzer.

3. By cassette

• Make sure the volume is loud enough to wake you.
• Set the mode selector © to TAPE.
• Press the ALARM ON/OFF button © (ON= -.). The alarm indicator on the

display © comes on.

• Place a prerecorded cassette in the cassette holder and press the ► PLAY

button.

• At the set alarm time you will be woken by the cassette player.
• Atthe end of the cassette or if the ► PLAY button is not pressed, the BUZZER

will automatically take over.

ALARM OFF You can switch off the alarm in 3 ways:

repeat alarm

1. Switching off the alarm for 9 minutes

• Press the REPEAT ALARM button ©. With this button you temporarily switch

off the alarm. After nine minutes the alarm (radio, buzzer or cassette) will
sound again. If you again press the REPEAT ALARM button, the same will
happen again. If the REPEAT ALARM button © is not pressed again, the
alarm will switch itself off after 1 hour and 59 minutes. The following day the
alarm signal will sound again at the set alarm time.

24 hours 2. Switching off the alarm for 24 hours

• Press the AL. OFF button ©. The alarm is now switched off for 24 hours and

will sound again the next day at the same time.

off 3. Switching off the alarm completely

• Set the ALARM ON/OFF button © to OFF

jl

. On the display the alarm

indicator will disappear and the alarm is now switched off. If you wish to be

woken the following day again, you must press the ALARM ON/OFF button
© (ON = .-.) before going to sleep.