How to use and set up your tv, Press the volume, Press the channel a – Philips PR 0920X User Manual
Page 4: Slide off the battery compartment lid on the, Replace the lid, How to u
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How TO U
se
and
S
et
U
p
Y
our
TV
T
elevision
[—(BEGIN)
Connect the AC cord
(supplied) to the AC 120V jack
on the hack of the TV. Then, plug
in the TV.
Press the POWER but
ton to turn the TV ON.
Connect earphones (not sup
plied) to the EARPHONE jack
if you want personal listening.
Note: Do not connect earphones
that have an L-shaped plug. The
plug may interfere with the cabinet.
<$>
Press the VOLUME.
or
T
button to adjust the
sound level.
Press the CHANNEL
A
or
T
button to select TV chan
nels. When channels are not
programmed, the TV will
search until a channel is found.
Press the MENU button
to display the TV’s on-screen
menu. Press the MENU button
repeatedly to select an item in
the menu. To clear the menu,
press the MENU button
repeatedly until the menu dis
appears from the TV screen.
channel number
will appear briefly
when the TV is first
turned ON (and with
channel changes).
To display the chan
nel number, press
the DISPLAY but
ton. To remove the
chaimel number,
press DISPLAY
again. The channel
number and Closed
Captioning can not
appear on-screen at
the same time.
M
enu
ClIANM I. At to M
kmo
F
ollow the steps in this sec
tion to quickly add area
channel numbers into the TV’s
memory.
|-(BEGIN)
Press the MENU but
ton repeatedly to select
CHANNEL SET with the
TV’s on-screen arrow.
Press the SELECT but-
V
Press the MENU button
ton repeatedly or the SET
to select AUTO MEMO
When AUTO i
(+) or (-) buttons to select
with the TV’s on-screen
MEMO action is
TV or CATV. The selected
arrow.
completed, the low-
mode will appear in PUR-
est memorized chan-
PLE.
nel reappears on the
• Select TV if you have an
V
Press the SELECT but-
screen.
Antenna connected to the TV.
ton to start automatic channel
• Select CATV if you have a
programming. _
Cancel AUTO
Cable Signal connected to
w
MEMO by pressing
the TV.
the MENU button.
R
emote
T
A. t
o load the supplied batter
ies into the remote:
-----(BEGIN)
1. Slide off the battery com
partment lid on the
remote control.
2. Insert two AA batteries
(supplied) into the bat
tery compartment as indi
cated by the polarity (+ / -)
markings inside the battery
compartment. Batteries
installed with incorrect
polarity may damage the
remote control.
3. Replace the lid.
Battery
Compartment
Lid
Battery
Compartment
Point the remote control
toward the remote sensor win
dow on the TV when operating
the TV with the remote.
Power Button ----------------------
Press to turn TV ON and OFF.
Number Buttons --------------------
Press two number buttons to
select TV channels. For exam
ple: to select channel 6 ... press
"0" first, then "6."
When you select cable chan
nels which are equal or greater
than the number 100, press the
+100 button, then press the last
two digits of the channel you
want. For example, to select
channel 117, press the +100
button, 1,7.
Channel Scan Buttons
Press to scan up or down
through programmed channel
numbers.
When you press these buttons
before setting AUTO MEMO,
the TV scans to the next avail
able channel. If the TV is not
receiving a signal, the TV will
continue to scan channels until
you press the MENU button to
exit. In this case, check anten
na connections.
Menu Button
Press to show the on-screen
menu and move through the
menu.
Select Button
Press to select items in the on
screen menu.
O
SL EP
CD
(
j
3 CD Q) c3-
(33 CD ®
(D CD CD
ALT.CH
s
CD CD
\
Sleep Button
Press to set the TV to
automatically turn itself
OFF.
-Display Button
Press to display the channel
number at all times. (If a
Closed Caption mode is
selected, the channel num
ber will only appear
briefly.) To remove the
channel number, press the
DISPLAY button again.
Alt. Ch (Alternate
Channell Button
Press to return to the TV
channel you were viewing
immediately before switch
ing to your current channel.
Volume (At and IT)
Buttons
Press to adjust the TV
sound level.
Mute Button
Press to turn the sound OFF
on the TV. Press again to
return the sound to its previ
ous level.
Set (+1 and t-1 Buttons
Press to select items in the
menu or to adjust the pic
ture controls.
-
4
-