Hooking up your tv (basic antenna tv conneci, Antenna – Philips XS1956CI User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□I
H
ooking
U
p
Y
our
TV
(B
asic
A
ntenna
TV
C
onneci
A
ntenna
A
combination antenna receives
normal broadcast channels
(VHF 2-13 and UHF 14-69).
Your connection is easy since
there is only one 75Q (ohm)
antenna plug on the back of your
TV - and thafs where the antenna
goes.
C
begin
J
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
<3^ Push the round end of the
adapter (or antenna) onto the 75Q
plug on the rear of the TV. If the
round end of the antenna wire is
threaded, screw it down tight.
Remember:
Be sure to set the
TV for the type sig
nal you've connect
ed (see the “Tuner”
section on page 11
of this manual.)
To set the TV to
select only the chan
nel numbers in your
area see how to
“Program" or "Add"
channels in the TV’s
memory on page 12
(Auto Program sec
tion).
To order any option
al accessory contact
your dealer or the
Philips Parts Center
at 1-800-851-8885.
Combination VHF/UHF
Antenna
(Outdoor or Indoor)