How to use the input control (aa^ inputs), 0c5o o © © ® © ® © ® © o – Philips XS1956CI User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i
4
*i|
How
TO U
se
the
I
nput
C
ontrol
(AA^
I
nputs
)
A
l
dio
A 11)10 I
m
>
l
IS
The TV*s AudiolVideo Input jacks
are for direct picture and sound
connections between the TV and
a VCR (or similar device) that
has AudiolVideo Output jacks.
C
beoin
J
Connect the VIDEO (yellow)
CABLE to the VIDEO IN jack
on the back of the TV. Then con
nect the AUDIO (red and white)
CABLES to the AUDIO (left and
right) IN jacks on the rear of the
TV.
Connect the VIDEO (yellow)
CABLE to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
<|> 1\irn the VCR and the TV
ON.
<
3
>
Press the MENU button on
the remote to display the
onscreen menu.
Press the CURSOR UP A or
CURSOR DOWN ▼ buttons
until the word INPUT is high
lighted.
Press the CURSOR RIGHT
^ or CURSOR LEFT ^ button
to display the picture/sound menu
(ANTENNA, EXT 1). Use the
CURSOR UP A or DOWN ▼
buttons to select.
Now your ready to place a prere
corded video tape in the VCR and
press the PLAY ^ button.
IF YOU ARE USING A
MONO DEVICE, USE
ONLY THE AUDIO
L/MONO JACK. IF A
DUMMY JACK IS
PLUGGED INTO THE
AUDIO R, NO SOUND
WILL BE HEARD.
VCR
(EQUIPPED WITH
VIDEO AND AUDIO
OUTPUT JACKS)
SOUND
AVL
STEREO
ON
l INPUT
►I
SLEEPTIMER
OFF
SmartLock
►
0
c5o o
© © ®
©
®
©
®
©
o
MUTE
o'"
OMAHI «HMtll
o o
ANTENNA
lEXT 1
SOUND PICTURE
32