Activating the tv’s on timer control, Press the cursor right ^ or cursor left ^ button, Activating the timer control – Philips XS1956CI User Manual
Page 18: D (d
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□I
S
etting
the
TV’
s
C
lock
y
bur television comes with an
onscreen clock. During normal
operation the clock appears on the
screen when the STATUSIEXIT button
is pressed or when channel changes
occur.
(BEOIN3
Press the CLOCK button on the
I
remote to display the onscreen
CLOCK menu.
Press the CURSOR UP
A
OR
CURSOR DOWN ▼ buttons until
the words SET CLOCK are highlight
ed.
Enter the current time using the
NUMBERED buttons. If the first
number is a single digit first enter a
zero then the digit (i.e., press “0”, then
press “8”).
or CURSOR LEFT ^ buttons to set
either AM or PM time.
ISET CLOCK - - : - - A M |
TIMER ACTIVE
CHANNEL
ON
12
I
SET CLOCK 10:00 AMI
TIMER ACTIVE
ON
CHANNEL
12
Note: If a power failure occurs, the
TV's CLOCK will have to be reset.
If no time is set, the time will not
appear onscreen.
Remember: Be g
sure to press “0”
first and then the hour
number for single digit
entries.
To clear the onscreen
menu press the STA-
TUS/EXIT button or
wait a few seconds after
you have finished your
adjustment and the
menu will automatically
disappear from the
screen.
Note: The CLOCK onscreen menu can
also be accessed through the main menu
by pressing the MENU button; then
scrolling up/down with the CURSOR
UP
A
or CURSOR DOWN ▼ buttons
until the word CLOCK is highlighted.
Press the CURSOR RIGHT ^ button
to activate the CLOCK menu and follow
the steps above to set the time._______
A
ctivating
the
TV’
s
O
n
T
imer
C
ontrol
7
ust like an alarm clock you can
set the TV to turn itself on at the
same time everyday.
I di
Press the CLOCK button to
display the Clock onscreen menu.
Press the CURSOR UP
A
or
CURSOR DOWN
T
button until
the words TIMER ACTIVE are
highlighted..
Press the CURSOR RIGHT
^ or CURSOR LEFT ^ button
to select ON (if activating) or OFF
(if deactivating) the Timer control.
© (D (D
@ ® ®
© ®
cS)
SET CLOCK
I
1QÜQAM
ITIMER ACTIVE
OFFI
CHANNEL
12
START TIME
- - : - - A M
SET CLOCK
10:00 AM
ITIMER ACTIVE
ONI
CHANNEL
12
START TIME
- - : - - A M
Remember: Be g
sure to set the,
clock to the current
time, then set the time
you want the television
to turn on using the
START TIME control
as described on the next
page.
The onscreen menu will
time out and disappear
from the screen when
you finish, or you can
press the
STATUS/EXrr button
to clear the menu from
the screen.
18