Connecting with the usb y-cable – iStorage diskAshur Pro SSD Manual User Manual
Page 6
6
Connecting with the USB Y-Cable
If none of the diskAshur PRO SSD LEDs power on a single USB
connection, use the included USB Y-cable.
1.
Attach diskAshur PRO SSD’s integrated USB cable to the female
connector of the USB Y-cable.
2.
Connect the two male USB connectors to two available USB ports on
your computer.
3.
At least one of the diskAshur PRO SSD’s LEDs should turn on,
indicating that the diskAshur PRO SSD is powered.