Setting the unattended auto lock feature – iStorage diskAshur Pro SSD Manual User Manual
Page 10
10
Setting the Unattended Auto Lock Feature
To protect against unauthorized access if the drive is unlocked and unattended,
diskAshur PRO SSD can be set to automatically lock after a pre-set amount of time. In
its default state, the diskAshur PRO SSD Unattended Auto Lock feature is turned off. The
Unattended Auto Lock can be set to activate after 5, 10 or 20 minutes.
To set the Unattended Auto Lock please uses the following steps:
1. Enter the Admin mode by pressing and holding
UNLOCK + 0 for five seconds until
the LED flashes
RED
. This indicates that you can enter the Admin PIN.
2. Enter the Admin PIN and press
UNLOCK. The drive is in Admin Mode when the LED
has changed to solid
BLUE
.
3. Once in Admin mode, press
UNLOCK + 6. The LED should start flashing
RED
and
BLUE
intermittently.
4. Press one of the numbers below that corresponds to amount of time you would like
the drive to lock after no activity:
1=5 minutes
2=10 minutes
3=20 minutes
0=OFF
The Default is OFF for this feature.
5. After you have input the number, the LED should flash
GREEN
3 times to indicate
that you have successfully set the Unattended Auto Lock feature.