iStorage diskAshur Pro SSD Manual - Manual (Page 5)

5
diskAshur PRO SSD - Connections
Before you begin
Be sure to review the following information before you begin to use
diskAshur PRO SSD.
Attention: Use only the included cables with your diskAshur PRO
SSD. You might damage the drive if you use a cable not included
with the diskAshur PRO SSD.
diskAshur PRO SSD is designed for portable use without an AC power
adapter and in most cases will be able to power on a single USB port. In
the event that diskAshur PRO SSD is unable to power on a single USB
connection, use the included USB Y-cable. The diskAshur PRO SSD is
not self-powered and requires connection to a USB port to perform all
operations
Connecting diskAshur PRO SSD
1. Attach the integrated USB cable of the diskAshur PRO SSD to an
available USB port on your computer, as shown below.
NOTE: While diskAshur PRO SSD will work with any USB port, for the
fastest speeds connect to a USB 3.0 port on your computer.
2. At least one of the diskAshur PRO SSD LEDs should turn on,
indicating that it is receiving power.
If none of the LEDs turn
on or the drive locks when
writing to the disk, use the
included USB Y-cable.
Refer to directions on the
following page
About the diskAshur PRO SSD