Coway BA08-AR - Manual (Page 22)

22
Installation the Product
5 . Push fixing screw into the fixing slider . And slide the
fixing slider with fixing screw to be hooked in the
installation boad .
6 . insert fixing screw into the holes and pushfixing
rubber, fixing washer into the fixing screw to prevent
from wobbling of the main body . Then tighten up the
fixing nuts .
If you do not tighten nuts. It may cause injury or damage to
customer.
7 . Please connect the bidet hose to the filter fixing
stopper .
 Please shorten the bidet hose as soon as possible. If the bidet
hose is long, it may cause noises.
8 . Open the main water supply valve .
9 . Connect the power plug to the electrical outlet .
 Make sure to use a grounded electrical outlet. In the case of short
circuit, grounding prevents electric shock or injury.
Make sure to use a dedicated electrical outlet with grounding
terminals.
If it is unavoidable to use an extension cord, use one with
grounding terminals for power rating of 125 V~, 7 A or higher.
INSTALLATION
Grounding
terminals
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 22 2009.6.10 6:17:1 PM