Coway BA08-AR - Manual (Page 19)

19
H
ow
To U
se
HO
W
TO USE
| F
or R
ear C
leansing
| F
or F
ron
t C
leansing
For Front Cleansing
 Front cleansing
Sit on the seat and press the front cleansing function selection button on the
remote control.
- The front cleansing nozzle will remove the cold water remaining inside
the nozzle before the water stream is ejected so that you can have front
cleansing with water set to a desired temperature.
- The cleansing water is ejected for about 1 minute and then automatically
stopped.
- An automatic nozzle cleaning is performed for about 5 seconds after cleansing when the nozzle retracts
itself.
 Adjust the nozzle position by pressing the nozzle position button.
 Press the wide function selection button to adjust the desired water ejection range.
 You can select the air mixed water type by pressing Air+ function selection button.
 If the front cleansing function selection button is pressed again while in cleansing operation, additional
front cleansing starts again for another 1 minute.
 While in cleansing, users can adjust the water temperature, water pressure, and nozzle position according
to their preference.
 move
Press the move function selection button on the remote control.
- The nozzle moves back and forth, providing a wider range of cleansing.
 It will be worked continuously while the cleansing function is operated.
 You can adjust the nozzle position by pressing the nozzle position
button.
 To stop the move function, press the move function selection button
again.
 Air dryer
Press the air dryer function selection button on the remote control.
- Warm air blows for about 2 minutes to dry the wet part.
 If you wipe out the wet before turning on the air dryer function, you can
finish drying faster.
 You can adjust the air dryer temperature by pressing the water pressure/air
dryer buttons.
 If the air dryer function selection button is pressed again while in drying
operation, additional drying starts again for another 2 minutes.
 If the air dryer function selection button is pressed while in cleansing operation, the cleansing function is
stopped and drying starts immediately.
 Stop
If you want to stop the operation in use, press stop button.
- It stops all operating functions.
 The air dryer function is stopped in 2 seconds after pressing the stop
button.
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 19 2009.6.10 6:16:57 PM