Coway BA08-AR - Manual (Page 15)

15
H
ow
To U
se
OPER
AT
iON/
iND
iC
AT
iON P
AR
T
Indication part
1 Remote control signal transmitting part
It is the transmitting window that transmits signals when the remote control buttons are pressed.
2
Nozzle position indicator
If you press the nozzle position button, the lamp is turned on in 5 steps.
3 Seat temperature adjustment indicator
When you press the seat temperature adjustment button, you can adjust the indicator (L  M  H 
Off).
4 WIDE function indicator
When you press the WIDE function selection button, the indicator is turned on (Straight line  step1

step2).
5
Air+ function selection indicator
When you press Air+ function selection button, the indicator is turned on.
6 Water pressure/air dryer temperature indicator
If you press the water pressure/the air dryer temperature adjustment button, the temperature lamp is
turned on in the step1  step2  step3 order.

It is used as the water pressure adjustment indicator when you operate the front cleansing/rear
cleansing function, and it is used as the water temperature adjustment indicator when you
operate the air dryer function.
7
Signal transmitting status indicator
It indicators that you transmit the signal.
8 Battery status indicator
The battery status indicator is turned off and on and it notifies the battery replacement time.
9 Warm water temperature adjustment indicator
When you press the warm water temperature adjustment button, you can adjust the temperature
lamp (L  M  H  Off).
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 15 2009.6.10 6:16:52 PM