Coway BA08-AR - Manual (Page 12)

12
KEEP IN MIND
 Setting/canceling silent mode
1) Turn on the remote control by pressing the power selection button on the remote control with pulling out
the power plug, and plug in the power plug with pressing the rear cleansing function selection button of
the bidet body (Alarm).
2) Press the stop button on the remote control and select the desired status.
- The alarm rings 1 time (ding) : It means the release of the silent mode.
- The alarm rings 2 times (ding ding) : It means that the silent mode was set.
3) When you select the wanted status and press the air dryer function selection button on the remote
control, the selected setting is saved and it is switched to the waiting status (The alarm rings 3 times (ding
ding ding)).
 Setting/canceling remote control power saving mode
1) With the remote control turned on, press and hold the nozzle position button for 5 seconds or
more (The LCD screen blink).
2) When the nozzle position indicator is lightened on LCD screen, it means that the remote control power
saving mode is set, and when it is turned off, it means that mode is released (See the following figure).
3) When you press any button on the remote control, it is switched to the waiting status with saving the
setting.
 With power saving mode on, the batteries on the remote control last longer.
 The product is supplied with the remote control power saving mode set.
Power saving mode set screen Power saving mode canceled screen
 When you press the power selection button on the remote control, the powers on
the remote control and bidet body are operated simultaneously (But the button in
the bidet body work regardless of the remote control).
 When the bidet body power selection indicator doesn’t turn on even if you sit on
the bidet seat, as the power is turned off, turn on by plugging in the power plug
and pressing the power selection button.
Tips
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 12 2009.6.10 6:16:48 PM