Interlogix NX-148E - Manual (Page 5)

NX-148E LCD Keypad 3
I. GLOSSARY OF TERMS
Abort Delay:
An option that allows a delay in reporting to the central
station.
Authority Level: The level of access an individual has when using an alarm
panel.
Central Station: Location where alarm data is sent during an alarm report.
Chime Feature: An option that allows the keypad to sound a ding-dong
whenever an entry/exit door is opened.
Codes: Can be either User Codes (relating to a person) or Function
Codes (a toggle switch to turn specific functions on/off).
NOTE: A system may have either four (4) digit codes or six
(6) digit codes, but not a mixture of the two.
Duress Code: An option that allows a special code to be sent to the central
station that indicates the alarm system is being operated
under duress.
Forced Arming: An option that allows the system to be turned on (ARMED)
with one or more zones open. A system that is ready to be
“force armed” will flash the ready light. NOTE: Those zones
that are not ready will not create an alarm.
Function Code: A Function Code is either a four (4) or six (6) digit code that has
been programmed by the installer to operate a device.
Group Bypass: An option that allows the user to bypass multiple zones with a
single operation.
Instant/Delay: An option that allows an instant alarm condition for Entry/Exit
doors, or grants a delay to allow someone to enter/exit the
building without an alarm or before entering a user code to
disarm.
Master Code: A master arm/disarm code that can program other user
codes.
Partitioned System: A system divided into multiple areas in which its own user or
users control each area.
Perimeter: The outer edge of the protected area.
Quick Arm: An option that allows you to turn on (ARM) the security
system by pressing either the [STAY] or [EXIT] key on the
keypad control (for ARMING only) as programmed by the
installing company.
User Code: A four (4) or six (6) digit entry used to arm or disarm the
system.