Interlogix UVD-6130VE-2 User Manual - Manual (Page 9)

UltraView UVD-6130VE-2 WDR Dome Camera User Manual 7
Programming
Once the camera hardware has been installed, the camera can then be
configured.
Access the Setup menu
The Setup menu provides access to the camera configuration options. The on-
screen display (OSD) is only available in English.
Program the camera by attaching a standard video monitor to the system.
Figure 5: The Setup menu screens
Table 2: Setup menu description
Menu item Description
Lens Defines the camera ID, mirror, and digital noise reduction (DNR) set up.
Shutter/AGC Defines the method of iris control.
Pict Adjust Defines the image quality functions.
White Bal Defines the white balance (WB) set up.
WDR Defines the wide dynamic range (WDR) set up.
NR Defines the digital noise reduction level.
BLC/HLC Defines the highlight compensation (HLC) and backlight compensation
(BLC) set up.
Day/Night Defines the day/night (D/N) set up.
EZoom Enables/disables digital zoom.
DIS Enables/disables the digital image stabilizer.
Privacy Defines privacy mask set up.
Motion Det Defines the motion detection set up.
Sync Displays the current synchronization mode.
Camera ID Defines the camera ID displayed on-screen.
Language Defines the language of the OSD.
Camera Reset Resets the camera to factory default settings.
Save All Saves changes made.
Exit Exits the menu and returns to live mode.