Cisco 7100 Series - Manual (Page 6)

4
.
Rack-Mount the Router (continued)
22064
Note: The second bracket attaches to the other side of the chassis.
The brackets can also be installed with the front panel forward.
0
2
Attach the Router to the Rack
1 Locate the screws to mount the chassis
in the rack.
2 Position one person to lift the chassis
into the equipment rack.
3 Align the bracket holes with the
mounting holes in the equipment rack.
4 Use a Phillips screwdriver to attach the
router to the equipment rack.
Warning Do not touch the power
supply when the power cord is
connected. For systems with a
power switch, line voltages are
present within the power supply
even when the power switch is off
and the power cord is connected.
For systems without a power
switch, line voltages are present
within the power supply when the
power cord is connected.