CatEye OS1.1 - Manual (Page 13)

OS 1.1 13
Menu screen (Function settings)
Display contrast setting
Adjusts the contrast of the screen (right: darker, left: lighter).
Move the scale mark using SELECT/MODE button, and
press ENTER/START/STOP button to save the new "con-
trast settings".
Note: The darker the display, the higher the battery con-
sumption.
Personal distance
You can input accumulated distance from a different
cyclocomputer. Then the total distance starts measuring
from that figure. "This is your Personal Distance". Up to six
digits can be entered.
How to enter personal distance
1) Select the first digit using SELECT/MODE button.
2) Press ENTER/START/STOP button to move to the next digit.
3) When you have entered the last digit, press ENTER/START/STOP but-
ton to complete the process.
Note: You can reset the number by simultaneously pressing START/STOP/
ENTER button and either MODE/SELECT button on the "INPUT"
screen.
Mode navigation on/off
Shows what is the previous/next function when
MODE button is pressed to navigate to a new
function. In the default setup, mode naviga-
tion is on.
Select "ON" or "OFF" using SELECT/MODE
button, and press ENTER/START/STOP but-
ton to save your selection.
Note: At initial setting, this function has al-
ready been on.
ENTER
(START/STOP)
Function
setting screen
ENTER
(START/STOP)
Function
setting screen
ENTER
(START/STOP)
Function
setting screen