Interlogix TVC-6120-1 User Manual - Manual (Page 13)

TruVision TVC-6110-1 / TVC-6120-1 Camera User Manual 11
Set the camera image characteristics such as brightness, contrast, sharpness,
hue, and saturation (called “Gain” here) of the picture. The parameters of each
can be set between 0 and 255.
Use the mirror function to flip the camera image so that it is correctly orientated
for viewing. The image can be flipped vertically, horizontally or horizontally-
vertically (180 degrees). Default setting is Off.
Set ATR level
This feature is similar to WDR (wide dynamic range). It is used when there are
both bright and dark areas in the picture. It helps improve the contrast between
objects.
In the Setup menu, go to ATR and select the desired luminance and contrast
parameters.
Luminance: Select the desired luminance level - High, medium, low (default)
Contrast: Select the desired contrast level - High, midhigh, mid (default), midlow,
low
Set motion detection
Use this function to identify when a moving object passes in front of the camera
to activate an alarm. Up to four motion detection areas can be configured, each
by size and location on-screen.
In the Setup menu, go to Motion Det and select the desired parameters. Default
setting is Off.