Interlogix NX-4V2 User Manual - Manual (Page 8)

4 NX-4V2 LED Keypad User Manual
Glossary of terms
Table 1: Glossary of terms
Term Definition
Abort Delay An option that allows a delay in reporting to the central station.
Authority Level The level of access an individual has when using an alarm panel.
Central Station The location where alarm data is sent during an alarm report.
Chime Feature An option that allows the keypad to sound a ding-dong whenever an
entry/exit door is opened.
Codes Can be either User Codes (relating to a person) or Function Codes (a
toggle switch to turn specific functions on/off).
Note: A system may have either four-digit codes or six-digit codes, but not
a mixture of the two.
Duress Code An option that allows a special code to be sent to the central station that
indicates the alarm system is being operated under duress.
Forced Arming An option that allows the system to be turned on (ARMED) with one or
more zones open. A system that is ready t
o be “force armed” will flash the
ready icon.
(Note: Those zones that are not ready will not create an alarm.)
Function Code A Function Code is either a four (4) or six (6) digit code that has been
programmed by the installer to operate a device.
Group Bypass An option that allows the user to bypass multiple zones with a single
operation.
Instant/Delay An option that allows an instant alarm condition for Entry/Exit doors, or
grants a delay to allow someone to enter/exit the building without an
alarm, or before entering a user code to disarm.
Master Code A master arm/disarm code that can program other user codes.
Perimeter The outer edge of the protected area.
Quick Arm An option that allows you to turn on (ARM) the security system by
pressing either the [STAY] or [EXIT] key on the keypad control (for
ARMING only) as programmed by the installing company.
User Code A four (4) or six (6) digit entry code used to arm or disarm the system.