Interlogix NX-4V2 User Manual - Manual (Page 17)

NX-4V2 LED Keypad User Manual 13
another reset. If the keypad still beeps after repeated attempts, please
contact your installer.
Set system date
1. Press the [
∗
]-[9]-[6].
2. Enter the “Master Code”.
3.
Enter the “Day of Week “
1 = Sunday 3 = Tuesday 5 = Thursday 7 =Saturday
2 = Monday 4 = Wednesday 6 = Friday
4. Enter the “Month Code”. Must always be two (2) digits.
01 = January 05 = May 09 = September
02 = February 06 = June 10 = October
03 = March 07 = July 11 = November
04 = April 08 = August 12 = December
5. Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
th
would be entered as [0] –[5].
6. Enter the last two digits of the “Year Code”.
Example: For 2007 enter [0]
–[7].
Setting the system
1. Press [
∗
]-[9]-[7].
2. Enter the “Master Code “.
3. Enter the “hour code” which must be two (2) digits. Note: The clock is a 24-
hour clock. Refer Table 4 below.
4. Enter the “minutes code” which must be two (2) digits.
Example: 7 minutes after would be entered [0] –[7].
Table 4: Hour codes
Time Hour code Time Hour code Time Hour code
12:00 Midnight 00 8:00 AM 08 4:00 PM 16
1:00 AM 01 9:00 AM 09 5:00 PM 17
2:00 AM 02 10:00 AM 10 6:00 PM 18
3:00 AM 03 11:00 AM 11 7:00 PM 19
4:00 AM 04 12:00 Noon 12 8:00 PM 20
5:00 AM 05 1:00 PM 13 9:00 PM 21