Interlogix POE302-MS - Manual (Page 8)

2 IFS POE302-MS Ethernet Injector User Manual
• Auto-detection of POE IEEE 802.3at equipment and
devices to prevent damage caused by incorrect installation
• Remote power feeding of up to 328 ft. (100m)
Hardware
• Metal Enclosure
• LED indicators for Power and PoE in-use
Standard Compliance
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3at Power over Ethernet
• FCC Part 15 Class A, CE
Note: PSE (Power Sourcing Equipment) is a device (switch or
hub for instance) that will provide power in a PoE setup. The
maximum allowed continuous output power per such device
per the IEEE802.3 at standard is 30 Watts.
PD (Powered Device) is a PoE-enabled device powered by
PSE and thus consumes energy, such as an IP camera, IP
access control, IP intercom, VoIP and wireless access points
(WAP), etc.