Interlogix SP-PoE - Manual (Page 5)

Storage:
Temperature: -20°C to 70°C
Relative Humidity: 5% to 90% (non-condensing)
Electrical Specification
Output Voltage:
DIP switch 5 V: 5 VDC, 2.0 A max
DIP switch 12 V: 12 VDC, 1.0 A max
Note: This product is intended to be supplied by a UL Listed Direct Plug-In
Power Unit marked "Class 2" or "LPS" and output rated 48 VDC, 3 Amp
minimum.
Hardware installation
Before Installation
If a power socket is unavailable for the AC-DC adaptor of the network devices,
the SP-PoE provides DC power for the Ethernet device conveniently and easily.
The SP-PoE separates the power out and provides two kinds of DC power output
through its DIP switch and its voltage and current shown as below:
 5 VDC / 2A
 12 VDC / 1A
Figure 2: 5 V / 12 VDC out DIP switch
The default value is set on 5 V. MS-POE and SP-PoE units can be installed in
pairs. However, the use of a third-party device is allowed if the device complies
with IEEE 802.3af standard.
SP-PoE Splitter User Manual 5