Interlogix GE-DSSG-244-POE Installation Guide - Manual (Page 4)

IFS NS2503-24P/2C Quick Guide
4
Introduction
The IFS Layer 2 Managed Gigabit Switch series NS3601-24P/4S, GE-DSSG-244, and GE-DSSG-244-POE are 24-port Gigabit
Ethernet Switches with SFP fiber ports and robust layer 2 features. The description of these models is shown below:
GE-DSSG-244
24-Port 100/1000Base-X with 8 Shared TP Managed Stackable Fiber Switch
NS3601-24P/4S 24-Port 10/100/1000Base-T PoE Managed Stackable Switch / 380W / IEEE 802.3af
GE-DSSG-244-POE 24-Port 100/1000Base- T PoE Managed Stackable Switch / 220W / IEEE 802.3af
Package Contents
Open the box of the Managed Switch and carefully unpack it. The box should contain the following items:
Check the contents of your package for following parts:
 The Managed Switch x1
 User’s manual CD x1
 This Quick installation guide x1
 19” Rack mount accessory kit x1
 Power cord x1
 Rubber feet X4
 RS-232 DB9 male Console cable x1
 CB-STX50 – 50cm stack cable x1
If any of these are missing or damaged, please contact your distributor or IFS sales rep immediately, if possible, retain the
original carton and packaging material in case you need to return the product for repair/replacement.
Requirements
 The operating system of the workstation running Windows XP/2003, Vista, Windows 7, MAC OS X , Linux, Fedora,
Ubuntu or other platform compatible with TCP/IP protocols.
 Workstation installed with Ethernet NIC (Network Interface Card)
 Ethernet Port connection
 Network cables - Use standard network (UTP) cables with RJ45 connectors.
 Above Workstation installed with WEB Browser and JAVA runtime environment Plug-in
 Serial Port connection
 Above PC with COM Port (DB-9 / RS-232) or USB-to-RS-232 converter
It is recommended to use Internet Explore 6.0 or above to access Managed Switch.
Terminal Setup
To configure the system via terminal connection, connect a serial cable to a COM port on a PC or notebook computer and to
serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect
the console port directly through PC without the need of Null Modem.