Interlogix MCR300-1T-2S - Manual (Page 5)

- 5 -
1.3 Product Features
■ Standard
• Comply with IEEE 802.3 10Base-T
• Comply with IEEE 802.3u 100Base-TX
• Comply with IEEE 802.3ab 1000Base-T
• Comply with IEEE 802.3z 1000Base-SX / LX
• IEEE 802.3x Full-Duplex Flow-Control, Back-Pressure in Half-Duplex eliminate packets loss
■ Interface
y Dual 1000Base-SX / LX SFP Fiber-Optic Slots
y One 10/100/1000Base-T Copper, auto MDI/MDIX function
y Auto-Negotiation for 10/100/1000Base-T; Half-duplex or Full-duplex for 10Mbps and 100Mbps, full-duplex for 1000Mbps
y Supports maximum frame size up to 1522 bytes
y IEEE 802.1Q Tag VLAN Transparent, Multicast pass through
■ Redundancy
y Link status auto - detect and redundant on Dual ports with same connector type
y Only Primary-Port is active at a time, the Backup-Port is blocked
y While Primary-Port link fail occurrences, the traffic swaps to Backup-Port automatically
y Once the Primary-Port status backs to link up, the traffic swaps from Backup-Port to Primary-Port
y Hardware fiber port redundant
■ Mechanical
y External 5V / 2A DC power supply
y LED indicators for easy network diagnose
y DIP Switch for 3-Port operation with Gigabit Switch mode or Redundant mode
y Compact in size, easy installation
y Can be installed on IFS’s 19” Media Converter Chassis (MCR300)
y Wall mounting and DIN-Rail Supported